NCTC cloudUC FAQs
Poly (Polycom) FAQs
-
Yes! Polycom VVX x50 series phones can be equipped with an optional Obi WiFi USB module to allow the phone to work wirelessly. Note that if the Obi WiFi module is used, the phone still requires power thus a PoE power supply/injector would be required. When equipped with WIFi, the phone cannot act as an access point, it will only support functioning as a wireless client.
-
Yes, if you have a VVX 500 or 600 along with an accompanying VVX USB video camera, you can make use of the video calling feature assuming the person you are calling also has the same setup. To enable, please contact support to have this feature enabled.
-
This message does not have any impact on your call routing behavior. Poly (Polycom) phones have a power-saving mode to help conserve energy. This means that after a set idle time, the phone will power down until it needs to be used. Additionally, the phone will do something similar based on office hours so your phone is not consuming energy during the night when your office is closed. During this time, the phone will show Off Hours Mode on the display. By default, the off hours is set for 7 p.m. through 7 a.m. Monday through Friday and all day on Saturday and Sunday. Even if your phone is in power save, your phone can still be used. However, it will power down during these times unless activity is detected.
You can modify the off-hours times if desired by accessing Settings > Basic > Power Saving > Office Hours. Enter the time in 24-hour format, set the duration per day, and don’t forget to save your settings.
-
The VVX series phones support a PC port for Ethernet connectivity to an additional Ethernet device. The Ethernet PC port varies by model.
- VVX 150 – 10/100 Mbps
- VVX 201 – 10/100 Mbps
- VVX 250 – 10/100/1000 Mbps
- VVX 301 – 10/100 Mbps
- VVX 311 – 10/100/1000 Mbps
- VVX 350 – 10/100/1000 Mbps
- VVX 401 – 10/100 Mbps
- VVX 411 – 10/100/1000 Mbps
- VVX 450 – 10/100/1000 Mbps
- VVX 500 – 10/100/1000 Mbps
- VVX 600 – 10/100/1000 Mbps
*Note that to achieve any specific connection speed, the underlying network must support the maximum speed shown
-
If the display on your phone is completely blank and has no lights on it, this is a good indication that it is not receiving power. Polycom phones can receive their power from a power supply or via the network cable/PoE. If your phone has an external power supply ensure that it is plugged into a working A/C outlet and ensure that the plug is firmly plugged into the outlet and to the back of the phone. If your phone is powered by the network cable/PoE, ensure that the Ethernet cord from your phone to the wall jack is securely plugged in and is not damaged. If the cord is damaged, replace with a known good, working Ethernet cable.
-
An X next to your line appearance indicates that your phone is no longer registered to your cloudUC service. If all other phones in your office are working properly, the first step is to try to reset your phone. Please power cycle your phone to see if this clears the trouble. If a reset of the phone does not resolve the issue or if all phones are exhibiting this issue, check to ensure that your Internet connection is operational. If it is not, please contact your IT vendor or your ISP. If your Internet connection is working, please contact NCTC support for further assistance.
-
Select cloudUC Polycom phones are equipped with a built in Ethernet PC port for a secondary connection at the desktop. A single Ethernet connection at each workstation is sufficient to provide connectivity for not only your cloudUC phone but also a desktop wired Ethernet device. (Supported on the Polycom VVX 200, 300, 400, 500 and 600 series desk phones).
-
Your cloudUC Poly (Polycom) phone can be powered in two ways. One way would be utilizing an optional power supply which would plug into a standard 110 AC outlet at the workstation. The other way would be using Power over Ethernet (PoE). PoE provides power to the phone via the Ethernet cable that also provides network connectivity to the phone. Typically PoE is delivered through the use of a PoE equipped Ethernet switch that is installed in the network/telecom/server room. Additionally, PoE power injectors are available if a PoE switch is not available. NCTC strongly recommends PoE switching for most deployments as a centralized power source with a recommended battery backup/UPS can continue to power your cloudUC phones in the event of a short term power outage.
-
Yes, in order to wall mount your Poly (Polycom) phone, an optional wall mout kit is required. Please consult with your NCTC rep for pricing on a wall mount kit if one is required.
-
To restart your phone, you can remove and replace the Ethernet cable (PoE) or remove and replace the power cord. Alternatively you can restart via the Settings menu.
Settings > Basic > Restart Phone. When prompted “Are you sure?” press the Yes softkey. Note that when restarting your phone, if your PC is plugged into the back of your phone for it’s network connection, your PC will lose network connectivity briefly while the phone restarts.
Voicemail FAQs
-
Auto Attendant greetings are uploaded via the CAP. First however, you must have the recording created and saved in the proper format. There are a couple of ways to make a recording using various applications. The recording must be recorded in the following format: WAV format/U-Law Encoded, 8000khz sample rate, mono (not stereo).
To make life easy, there is a free app for iOS and Android that will record your greetings in the proper format and allow you to email the newly created recording to yourself or to anyone you like. Once the emailed recording has been downloaded, you can then proceed to upload it to your Auto Attendant in the CAP. The free app is called the Broadsoft Recorder and can be found by searching the appstore for your mobile platform for “Broadsoft Recorder”.
Alternatively you can record greetings on a PC, there is also a free app that can be used to record greetings on a PC, it is called Audacity. Audacity can be downloaded from their Audacity Team website. If you use Audacity, please ensure that your recording is exported as a WAV file that is encoded in U-LAW, sampled at 8000khz, with a single mono track. If you use a PC with Audacity to make your recordings, it is highly recommended to use an external microphone, USB for example. Using the built in microphone on most PC soundcards typically does not produce recordings of high quality where an external microphone will yield the best results.
Once your recording has been created, within the Auto Attendant widget under Edit Business Hours Menu, Edit After Hours Menu or optional Edit Holiday Hours Menu (Advanced Auto Attendant Only), you can listen to the current greeting if it exists as well as upload a new greeting. Note, that if you upload a new greeting, the old greeting will be discarded permanently. If you wish to save a copy of the old greeting, you can do so from the player which has a download button for this purpose.
You can also record and upload voicemail messages in the same manner from the Manage Phone System widget, by editing a user/extension then going to the Messaging tab.
-
An Auto Attendant is a feature that can answer calls and play a pre-recorded greeting to callers. For example, an Auto Attendant could answer inbound calls with a greeting stating: “Thank you for calling ABC Corporation, if you know the extension you wish to reach, you may dial it now, for sales press 1, for service press 2, for billing press 3, press 0 for an operator”.
NCTC cloudUC offers 2 types of Auto Attendants, a Basic Auto Attendant (included with all cloudUC subscriptions) and an Advanced Auto Attendant.The basic variety is a simple single layer menu with options 0-9 plus * and # as being defined digits that can be dialed.The advanced variety allows for multiple level menus. An example of an advanced Auto Attendant would be “Press 1 for Sales…Thank you for contacting our sales department, for equipment sales press 1, for software sales press 2, for billing questions press 3”.
-
The maximum length of a voicemail message is 10 minutes.
-
Absolutely! Voicemail copy and voicemail forward are both options for your mailbox. When voicemail copy is enabled, voicemail messages remain in your mailbox and a copy is sent to your email address. When voicemail forwarding is enabled, voicemail messages are simply forwarded to your email address and no longer reside in your voicemail inbox.
-
When a new voicemail message is in your mailbox, the message waiting indicator on your phone will flash. Additionally, the icon on your screen will indicate the presence of new messages. To listen to your messages, press the message key or press the message icon on touch screen models to automatically place a call to the message center.
nCommand Mobile FAQs
-
If your firewall does not have restrictive outbound policies from your LAN, no special firewall configuration is typically necessary. Some firewalls, however, employ a feature known as a SIP ALG or SIP Application Layer Gateway. This is a feature that is intended to aid in NAT traversal for VoIP, specifically SIP traffic, through the firewall. The SIP ALG feature typically will cause issues with NCTC cloudUC and it should be disabled on the firewall.
If your firewall does have restrictive outbound policy, there are specific destination IP addresses and TCP/UDP ports that must be permitted in order for your NCTC cloudUC service to operate correctly. Please contact NCTC cloudUC support for further information on the required IP addresses and ports that need to be opened on your firewall. NCTC cloudUC support can be reached at (615) 666-2151 or email support.
-
A high-speed Internet connection is required for cloudUC. Though cloudUC voice does not use very much bandwidth, it does require a high-performing, low-latency Internet connection. Typically a cloudUC voice call will consume less than 200kbps of bandwidth per active call. NCTC cloudUC utilizes voice over IP technology (VoIP) and in general, VoIP requires a fast, high-performing connection to the Internet with low packet loss, low latency and low jitter. Modern broadband Internet service is typically more than adequate to support excellent voice quality using cloudUC. Consult with your NCTC representative on specific requirements.
Packet Loss = % of packets lost during transmission – should be 1% or less
Latency = time in milliseconds that a packet takes to be received at it’s destination – should be 150ms or less
Jitter = variations in latency, should be 40ms or less
-
You can seamlessly move an active call to or from nCommand very easily without ever even putting the caller on hold. To do so:
To move an active call from nCommand to your desk phone
- While active on a call using nCommand, from your desk phone, dial *11
- This will seamlessly move the call from nCommand to your desk phone
To move an active call from your desk phone to nCommand
- From the nCommand app, open the Call screen
- In the lower right hand corner there is an icon that looks like a handset with 3 lines besides it. Press this icon
- Select Pull Call
- This will seamlessly move the call from your desk phone to nCommand
-
Running any application on a mobile device will consume valuable battery life. This applies to any mobile device, iPhone, Android, etc. If you intend to use nCommand extensively, please first ensure that your battery is healthy, and keep a charger handy in case charging is necessary.
-
Your username and password for nCommand should have been provided to you by NCTC when your service was installed or activated. Your username is your 10 digit assigned account direct inward dial (DID) number @corpgblobal.net. For example, if your account DID was 423-555-1234, your nCommand username would be 4235551234@corpglobal.net. Your password is your account password as configured during your account setup. If you do not know your password or if you forgot your password, please use the “Forgot Username/Password” functionality from the CAP login screen.
Note – For security reasons, your existing password cannot be viewed by any administrator, it can only be reset via password reset mechanisms.
-
Yes, nCommand is supported on iPhone as well as many other devices, not just mobile devices. The nCommand application can be downloaded for Windows, MAC, iOS and Android devices. Visit the nCommand App website to download the latest version of nCommand or for mobile devices, search for nCommand in the Appstore or Google Play Store.
-
The answer to this question depends on your configuration however if properly configured, nCommand does not use your cellular voice minutes, it does, however, use data. When nCommand communicates with cloudUC servers, it can use either cellular data or wifi data, depending on which is available. If you plan to use nCommand heavily, ensure that your cellular plan includes an adequate data plan to accommodate the additional data consumed by the application. Typically voice calls use very little bandwidth, less than 200kbps bidirectionally, but over time, this can add up. It is recommended that you use wifi whenever possible to minimize cellular data plan consumption.
General FAQs
-
Absolutely, cloudUC supports custom extension numbering plans to suit most customer needs. There are some extension numbers that are reserved and cannot be used.
211: Community services and information
311: Municipal government services, non-emergency number
411: Directory assistance
511: Traffic information or police non-emergency services
611: Telephone company (telco) customer service and repair
711: TDD and Relay Services for the deaf and hard of hearing
811: Underground public utility location
911: Emergency services (police, fire, ambulance and rescue services)
112: Emergency services (police, fire, ambulance and rescue services)
988: Emergency services (police, fire, ambulance and rescue services)
933: Emergency services address validation
2001: Reserved for Voice Portal -
Yes! cloudUC supports paging through the Polycom phone speakers inherently and does not require any additional equipment or fees. Note that Polycom Paging requires IP multicast support on the customer’s network.
If external loudspeaker paging is required, an additional Basic seat is required accompanied by an ATA and the appropriate paging equipment (paging interface unit and speakers/amplifier).
-
The cloudUC Customer Administration Portal is protected by SSL security thus all interaction with the administration portal is 100% secure.
By default, cloudUC does not employ SRTP or secure RTP, however, it can be enabled on a per-user basis. Enabling SRTP does require the addition of the Secure Voice feature, which does incur a small additional monthly fee.
In addition, cloudUC Hosted Fax is compliant with security standards if fax messages are not stored on cloudUC servers. For Personal Hosted Fax and Shared Hosted Fax, there is a setting to enable delivery of faxes via email only thus faxes are not stored on cloudUC servers.
-
NCTC cloudUC supports phones from Poly (Polycom) and Panasonic as well as ATAs from Grandstream.
- Polycom Soundstation IP (legacy)
- Polycom VVX 100, 200, 300, 400, 500, and 600 Series (Including X01 series)
- Polycom VVX 150, 250, 350, and 450
- Polycom Conference Room IP Phones (IP5000, IP6000, IP7000 and Polycom Trio Models)
- Panasonic KX-TGP600 DECT Cordless
- Grandstream HT 8-1 ATA
-
Various features can be accessed either by using buttons on your telephone. Additionally, several features can be activated using a * code. Below is a list of * codes and the applicable feature associated with each.
Code Function #8 Automatic Callback Deactivation *72 Call Forwarding Always Activation *73 Call Forwarding Always Deactivation *90 Call Forward Busy Activation *91 Call Forward Busy Deactivation *92 Call Forward No Answer Activation *93 Call Forward No Answer Deactivation *44 Call Recording (if enabled) *67 Calling Line ID Delivery Blocking per Call *65 Calling Line ID Delivery per Call *68 Call Park *88 Call Park Retrieve *98 Call Pickup *11 Call Retrieve (Call Pull) *69 Call Return *70 Cancel Call Waiting *99 Clear Message Waiting Indication (MWI) *97 Directed Call Pickup *33 Directed Call Pickup w/Barge In *55 Direct Voicemail Transfer *78 Do Not Disturb Activation *79 Do Not Disturb Deactivation #51 Hunt Group Busy Enable (make busy) #52 Hunt Group Busy Disable (make available) #53 Hunt Group Busy Status *62 Voice Portal Access *66 Last Number Redial Note that not all features are available for all seat subscriptions.
Meet Me Conference Moderator Codes
Code Function * Open Menu Options *1 Mute/Unmute *2 Participant Count *3 Turn On/Off Lecture Mode *4 Lock/Unlock Conference *5 Recording SubMenu *6 Invite Participant – Call New *8 End Conference Meet Me Conference Participant Codes
Code Function * Open Menu Options *1 Mute/Unmute Self *2 Participant Count *3 Log in as Moderator (requires Moderator code) -
If you have forgotten your cloudUC password for access to the CAP and/or nCommand, you can initiate a password reset from the CAP login page. Go to the cloudUC portal, there is a link within the login area of the page that states “forgot username and/or password”. Click the “forgot username and/or password” link, you will be prompted to enter the email address associated with your account. Once your account email address has been entered, click Send Mail. An email will be sent to the address entered with further instructions on resetting your password.
Note, If you change your password and you are an nCommand user, you must log into the CAP and sync your new password in order for your new password to function with nCommand. To resync your password, after you have logged into the CAP with your username and new password, click the icon next to your extension in the Location Menu > Manage Phone System tab. This will allow you to perform a password sync.
-
To log into the cloudUC CAP simply open a browser and navigate to the cloudUC portal.
Note that in order to log into the cloudUC CAP you must have an active account. If you would like to see a demo of the CAP and the features and functionality it provides, contact an NCTC representative by sending an email to support.
-
Not only does cloudUC offer business continuity features, it is built in. In the event of a disaster or even a not so disastrous event, cloudUC ensures that you are in touch with your customers without downtime. Utilizing built in call routing functions as well as optional mobile apps, cloudUC ensures that you can communicate with your customers anytime, on any device from anywhere.
-
Presence information is only available for users with a cloudUC Professional subscription. In other words, in order to view or have your presence information available or published, you must subscribe to a Professional level seat . For example if you have 4 users in your office and only 2 of them have Professional and the other 2 have Standard, the 2 Professional users would be able to see each other’s presence information where the 2 Standard users’ presence information would not be visible.
-
Installation of cloudUC service is extremely simple assuming that you already have appropriate LAN cabling, switching/routing and Internet service. NCTC will pre-configure and test your cloudUC service prior to installation making implementation hassle-free. In most cases, phones can be simply plugged in and be up and running in a matter of minutes. NCTC provides professional installation services as desired as well as self-install deployment options available.
-
Most installations do not need any special equipment to take advantage of cloudUC outside of what your office probably already has in place. All that is required is an adequate broadband Internet connection along with a properly designed and installed local area network (LAN). including cabling, switches, router/firewall.
Traditional PBX and key telephone systems typically use voice grade cabling. NCTC cloudUC is a voice over IP (VoIP) service and requires properly installed data grade cabling instead of voice grade cabling. NCTC cloudUC telephones connect to your local area network (LAN) using an Ethernet cable so properly installed Category 5E cabling is required at a minimum. The great news is that if you already have a wired Ethernet device where you intend to install your cloudUC phone, you can use a single Ethernet connection for your phone and the wired Ethernet device.
NCTC recommends that network equipment (Ethernet switching, routers and firewalls) be of business or enterprise grade/quality for the best results. Some consumer grade network equipment can cause performance issues with voice over IP (VoIP).
NCTC may recommend additional equipment based upon your use case.
Account Level Features FAQs
-
Advanced Auto Attendant
A multi-level Auto Attendant (for example, enterprise’s main Auto Attendant is configured to seamlessly route to the Auto Attendant of a particular department or location).
Call Recording
Allows a user to record their calls in either an always on or on-demand mode. Enabling the feature is done through the Customer Portal and on-demand recording is initiated with the “*44” code. 1GB of storage for each user for faxes, call recordings and voicemails.
Hosted Fax
A cloud based faxing solution that enables ANPI Users to leverage their Portal for sending and receiving faxes on their own private account without the need for hardware or fax machines. 1GB of storage for each user for faxes, call recordings and voicemails.
Virtual Extensions
An internal extension number for inter-office calling and forwarding incoming calls from external phone numbers.
Virtual Numbers
Local phone number with no services but includes unlimited incoming minutes.
Audio Conference
Non-overlapping conferences with 15 participants per conference. Includes on local dial-in number, conference access # and a moderator pin.
-
Auto Attendant
An automated attendant that answers calls and provides a personalized message to callers with options for connecting to the operator, dialing by name or extension, or connecting to up to nine configurable destinations (for example, 1 = Marketing, 2 = Sales, and so on). Configuration via the Customer Administration Portal allows hours of operation to be modified, with different options available for hours that the company is open or closed.
Call Control
The ability for users to control where their calls are directed (call forwarding, call park, call transfer, etc.)
Corporate Directory
Quick access to a directory of all NCTC cloudUC users associated with your system
Hunt Groups
Allows calls to be routed to groups of extensions in various manners such as simultaneous, circular, etc. Within the Customer Administration Portal, company administrators can choose from “hunt” schemes, each of which rings the specified phones in a different manner.
Music On Hold
Enables company administrators to upload an audio file (.wav file containing music, advertising, etc.) onto the system to be heard by parties while on hold.